NeT10 Wireless APN Settings

Net10 Wireless APN (Access Point Name) setting is crucial for connection to the network to access network services and internet through 4G and 5G network. For a successful internet connection for school, work, health services and entertainment, ensure that you are within network coverage with an active data plan. Net10 Wireless uses the AT&T network to provide coverage so this should not be an issue.

APN is essentially the name of the gateway on the service provider’s network that cellular devices connect to. These settings do not only contain the APN but also other associated settings like the type of APN and the protocol used. It also had settings for other network services like the MMS. 

net10 wireless apn

APN is ideally automatically set when a device first connects to the network. In some situations, you need to set it manually and I have provided it below. The settings provided are for ANdroid and iOS devices. You can adapt them to any other operating system like Windows Phone if you still use them.

APN Settings on Android Devices

To access the APN settings on your Android device, navigate to;

  1. Settings
  2. Connections / Network & internet / Wireless & internet / More
  3. Mobile networks / SIMs then select Net10
  4. Access point name
  5. Add  / +

Input the Net10 Wireless settings below.

NeT10 Wireless APN Settings for Android Devices

Leave the fields not shown blank or the default figures.

  • Name: NET10 Wireless
  • APN: tfdata
  • Proxy:
  • Port:  80
  • MMSC:
  • MMS Proxy:
  • MMS Port:  80
  • MCC: 310
  • MNC: 410
  • Authentication type: PAP
  • APN type: default,mms,supl,hipri
  • APN protocol: IPv4/IPv6
  • APN protocol: IPv4/IPv6

Save then select NET10 Wireless as your active APN. Restart your Android device.

If tfdata APN does not work, change the APN to ereseller.

APN Settings on iPhones

Access the APN settings page on an iPhone by navigating to ;

  1. Settings
  2. Cellular / Mobile Data / Mobile Service
  3. Cellular Data Network / Mobile Data Network

Input the Net10 Wireless  APN settings below on your iPhone.

NeT10 Wireless APN Settings for iPhone

Leave the Username and password fields blank.

  • APN: tfdata
  • Username:
  • Password:

If tfdata doesn’t work, change it ereseller then turn off and on your mobile data.

Scroll to Top